Service manual

1.5.6 Registration Roller Assembly
This unit is used to prevent paper skew prior to transfer process. Paper reaches the register, pushes
against the register, and then is pushed back to the correct position by its natural bounce.
1.5.7 Transfer Unit
The transfer unit transfers the toner image from the surface of the PC drum onto the paper. When
paper is transported across the transfer roller and PC drum, the transfer roller, located on the
reverse side of the paper, applies a positive electric charge to the paper to attract the toner image
from the drum to the paper.
Figure 1-16. Registration Roller
Figure 1-17. Transfer Unit
EPL-N2000 Service Manual Product Description
Rev. A 1-57