Service manual

ManualsBrandsEpson ManualsHardwareC82324*

1. The printer does not operate when power is turned on.

I

START

I

Use the correct AC voltage.

Replace

the fuse and

disconnect

CN 1 and CN3 on

+

the Cl 17 MAIN board.

No

L

Measure the output voltage from

the Cl 17 power supply board.

Replace the Cl 17 power supply

board.

&

Yes

=

Check all motors, solenoid, printhead,

and

drwers using a multlmeter.

+

Retest

No

Replace bad motor, solenoid, or

b

printhead. If driver also is bad,

replace at the same time.

Replace the Cl 17 MAIN board.

Yes

See

Section 5.5

to

repair the printer

mechanism.

*

+

END

5-5

Rev.

A