Service manual
Pfvduct
Descfiptkm
DEMO(M+
Servke
hisnual
7.
8.
9.
10.
11.
The binding area must be fiat. Figure 1-17 shows a cross section of the stapled area.
NG
Figure 1-17. Stapled Area 3
Never use forms joined with metal staples.
The binding (dots of paste or paper staples) must be outside the printable area.
Overlapping multi-part forms must be bound at the top side by spot gluing. The binding must
be secure and there should be no spilled
giue.
Figure 1-18 shows the correct multi-part form
binding method.
Multi-part
firm
sheets should be securely bound to each other, and the binding area must not
be too large.
Paate
Figure 1-18. Correct
Muiti-part
Form Binding
Fanfold Paper with a
Labal
Paper path:
Front only
Quality:
Plain paper
Width:
101-406 mm (4 - 16 inches)
Total thickness:
0.46 mm (0.018 inches)
rruximum
Weight:
Single
45- 70kg(14-
221b)
Multi-part
35- 48kg (11 -15 lb) x
n
(n
<
8), up
tothe
total thickness
No
pmling
area
‘w
01
10
A
A
13nml
c’
..-,.
\
~‘
t
-,
Figure 1-19.
Printabie
Area for
Fanfoid
Paper with a
Labei
1-1o
Rev.
A