Service manual

. . .
->
.., , ,,-<
c“
. .
DFX-5000+ Sarvica Mamml
Disassembly and
Assemb&
3.2.4.4 Removing the AC Inlet
1.
Remove the C117 power supply board assembly. (Refer to Section 3.2.4.2)
2. Remove the Cl17MAINboard assembly. (RAertoSection3 Q.43)
3. Remove the 3 CPS(M3 x8) screws and 1 CPB (0) (M4 x5) screw securing the earth plate to
the bottom panel assembly and remove the earth plate.
CPB
(M4x
AC INLET SET
Figure 3-24. Removing the Earth Plate
4. Remove the 2 CFS (M3 x 12) screws securing the AC inlet to the earth plate and remove the
AC inlet.
AC INLET SET
—— Eafih
C3
CFS (M3x12)
Figure 3-25. Removing the AC Inlet
Plate
Rev. A
3-19