User`s guide

Caution:
Make sure you don’t pull on the flat gold cable beneath the
ribbon cartridge.
Follow steps 2 through 8 in “Installing the Ribbon Cartridge,”
in Chapter 1.
Transporting the printer
If you need to transport your printer some distance, carefully
replace it using the original box and packing materials as
follows.
Warning:
Even when you need to carry the printer only a short distance,
do not carry it by yourself. The printer should always be
carried by two people holding the printer at the bottom.
1. Turn off the printer and remove any paper loaded in the
printer. If any printer options are installed, remove them.
2. Unplug the power cord from the electric outlet and the back
of the printer. Disconnect the interface cable from the
printer.
3. Remove the ribbon cartridge.
4. Install the protective materials onto the printer.
Troubleshooting and Maintenance 5-11