User`s guide

14. Check the PAPER SELECT indicator to see which tractor is
selected:
If the rear tractor arrow is lit, press the LF/FF/LOAD
button to load the paper.
If the front tractor arrow is lit, press the FRONT/REAR
button to switch to the rear tractor. When the printer
switches tractors, it also loads the paper automatically.
15. The paper is now loaded to the top-of-form position. If it looks
like the printing will start too high or low on the page, see the
next section for instructions on adjusting the paper position.
Adjusting the Paper Position
You can adjust the top-of-form position as well as the printing
position at any point on the page by using the TOP OF FORM and
MICRO FEED buttons. The printer then remembers the new
top-of-form position. When you use the optional pull tractor, you
can adjust the paper position in the same way as described below.
2-10 Loading and Using Paper