User`s guide

4. If the paper is not aligned with the tear-off edge, then press
the MICRO FEED buttons to feed the paper forward or
backward in l/216-inch increments. (You can also hold
down either MICRO FEED button to feed the paper
Note:
You can reset the tear-off position only when you are in tear-off
mode (after you press the TEAR OFF button once and the
TEAR OFF light is on). The printer remembers the new tear-off
position even after the printer is turned off, reset, or initialized.
5.
Tear off the page using the tear-off edge on the printer’s top
cover.
2-18
Loading and Using Paper