Specifications

Introduction Page 11
Macintosh System Requirements
To use your printer and its software with a Macintosh, your system should
have:
◗ One of the following Macintosh models:
LC475, LC575, LC630
Quadra series
Centris series
PowerBook
®
series (190, 520, 540, 550, or later)
PowerBook Duo 280, 2300c/100
Performa
®
475, 575, 588, 630, 5210 or later
Power Macintosh
®
series
iMac
™
series (for USB connection only)
◗ For serial connection: System 7.5.1 or later (7.6 or later
recommended)
For USB connection: iMac with System 8.1 or later
◗ At least 16MB of available RAM (32MB recommended)
◗ At least 50MB of free hard disk space (100MB recommended)
◗ RGB display or better
◗ Double-speed (2X) CD-ROM drive (quad-speed [4X] or faster
recommended) for installing the printer software
◗ For serial connection: an ImageWriter
®
II serial cable or equivalent
(8-pin mini DIN male/male, Belkin brand recommended; EPSON part
number: F2V024-06)
For USB connection to an iMac computer: a shielded USB “AB”
interface cable, from Series A (computer) to Series B (printer), up to
6.5 feet (2.0 meters) long.
Using an improperly
shielded USB cable—
especially a cable
more than 6.5 feet
(2.0 meters) long—
may cause the printer
to malfunction.
color900.book Page 11 Wednesday, January 6, 1999 12:39 PM