Specifications

Maintenance and Transportation Page 144
7 Lift the cartridge out of the printer and dispose of it carefully.
8 Lower the new ink cartridge into its holder with the label facing up and
toward the back of the printer.
9 Press down the ink cartridge clamp until it locks in place.
10 Press the
E load/eject button. The print head moves to the color ink
cartridge replacement position. If you need to replace the color ink
cartridge, repeat steps 6 through 9. Then continue with step 11.
11 Press the
E load/eject button again and close the printer cover.
The printer moves the print head and begins charging the ink delivery
system. The
Ppower light flashes and the printer makes various
sounds.
Charging takes about one minute. When it’s finished, the
Ppower light
stops flashing and stays on.
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets
into your eyes, flush
them immediately
with water.
Never turn off the
printer while the
Ppower light is
flashing, unless the
printer hasn’t moved
or made any noise
for more than
5 minutes.
color900.book Page 144 Wednesday, January 6, 1999 12:39 PM