Specifications
Table Of Contents
- Important Information
- Front Matter
- Contents
- Introduction
- Basic Printing
- Advanced Printing
- Printing on Special Media
- Managing Print Jobs
- Network Printing
- Optional Interfaces
- Maintenance and Transportation
- Troubleshooting
- Specifications
- Index
Troubleshooting Page 164
Solving Printing Problems
If the printer won’t print, first check that:
◗ The printer is turned on and the
Ppower light is on, but not flashing.
◗ Paper is loaded in the printer.
◗ The printer is plugged into a working electrical outlet that’s not
controlled by a switch or timer.
◗ The cable meets the specifications listed in Windows System
Requirements or Macintosh System Requirements.
◗ The interface cable is securely connected to the printer and computer
and both are turned on.
If you still can’t print, check the following solutions:
All lights are off
Possible cause Solution
The printer is not
receiving power.
Try these solutions:
◗ Make sure the printer is turned on.
◗ Turn off the power and plug in the power cord securely.
◗ Make sure the outlet is not controlled by a switch or timer and is
operable.
◗ Try using another power outlet.
color900.book Page 164 Wednesday, January 6, 1999 12:39 PM