Specifications
Table Of Contents
- Important Information
 - Front Matter
 - Contents
 - Introduction
 - Basic Printing
 - Advanced Printing
 - Printing on Special Media
 - Managing Print Jobs
 - Network Printing
 - Optional Interfaces
 - Maintenance and Transportation
 - Troubleshooting
 - Specifications
 - Index
 

Troubleshooting Page 165
The printer sounds as though it is printing, but nothing prints
The
 S
 paper out light is flashing or on
A 
B
 black or 
A
 color ink out light is flashing or on
Possible cause Solution
The print head 
nozzles are clogged 
or the ink cartridges 
are too old.
Clean the print head nozzles; see Cleaning the Print Head for 
instructions. If cleaning doesn’t help, replace the cartridges. For 
instructions, see Replacing an Ink Cartridge.
Possible cause Solution
If flashing, paper is 
jammed.
See Paper jams inside the printer.
If on, there is no paper 
in the sheet feeder or 
the paper is loaded 
incorrectly.
Load paper or remove the stack and reload it as described in the 
Printer 
Basics
 book or Media Loading and Handling Guidelines. Then press the 
E
 load/eject button to turn off the 
S paper out light and resume printing.
Possible cause Solution
If flashing, the ink 
supply is getting low.
You need to replace the indicated ink cartridge soon. Make sure you 
have a new cartridge, then see Replacing an Ink Cartridge for 
instructions.
If on, the ink cartridge 
is empty.
You must replace the indicated ink cartridge; see Replacing an Ink 
Cartridge for instructions.
color900.book Page 165 Wednesday, January 6, 1999 12:39 PM










