Service manual

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Product Description SPECIFICATIONS 9
1.2.3 Paper Feeding

Feeding method: Friction feed (rear)
Push tractor feed (rear)
Push and Pull tractor feed (rear)
Pull tractor feed (rear, bottom)

Feeder: Rear push tractor, CSF single-bin (Option)
Pull tractor (Option) and Roll paper holder (Option)

Paper path: Manual insertion Rear in, top out
CSF Rear in, top out
Push Tractor Rear in, top out
Pull Tractor Rear or bottom in, top out

Line spacing: 4.23mm (1/6 inch) or programmable
in increments of 0.0706mm (1/360 inch)

Feed speed:
Normal mode 4.23mm (1/6 inch feed) 53msec
Continuous feed 0.092MPS (m/sec.)
[3.61 IPS (inch/sec.)]
Copy mode 4.23mm (1/6 inch feed) 106msec
Continuous feed 0.042MPS (m/sec.)
[1.67 IPS (inch/sec.)]

Input Data Buffer: 32 Kbyte

Release lever:
The release lever must be set according to the following table below.

Paper thickness lever:
The paper thickness lever must be set at the proper position as shown below.
Lever position Paper path/ Feeder Paper/ Media
Friction Manual insertion (rear) Cut sheet (Single sheet and Multi
part)
Envelop
CSF single-bin Cut sheet (Single sheet)
Roll paper holder feed (rear) Roll paper
Tractor Push tractor feed (rear) Continuous paper (Single sheet &
Multi part)
Push and Pull tractor feed (rear) Continuous paper (Single sheet &
Multi part)
Pull tractor feed (rear) Continuous paper (Single sheet &
Multi part)
Pull tractor feed (bottom) Continuous paper (Single sheet &
Multi part)
Labels
Lever
position
Paper thickness (inch)
Minimum Maximum
0 0.06(0.0024) 0.12(0.0047)
1 0.12(0.0047) 0.19(0.0075)
2 0.19(0.0075) 0.26(0.0102)
3 0.26(0.0102) 0.32(0.0126)
4 0.32(0.0126) 0.44(0.0173)
5 0.44(0.0173) 0.52(0.0205)
Lever position Paper path/ Feeder Paper/ Media