Service manual

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Product Description OPERATOR CONTROLS 20
5. Select setting value with the LF/FF button.
Tear Off/ Bin LEDs and Paper Out LED show that the menu’s value by status of
On/Off/Blink/2-Blinks. That value can be changed by pressing the Tear Off/ Bin
button and the LEDs, the status of On/Off/Blink/2-Blinks will be changed as the
button is pressed.
6. When the LF/FF button is pressed, the printer memorizes the last setting value.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is
over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
Item Setting / Value *2
Page length for tractor
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5
inch, 11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Skip over perforation OFF, ON
Auto tear off OFF, ON
Auto line feed OFF, ON
Print direction Bi-d., Uni-d., Auto
Software ESC/P2, IBM 2390 Plus
0 slash 0, ∅
High speed draft OFF, ON
I/F mode Auto, Parallel, Serial
Auto I/F wait time 10 seconds, 30 seconds
Baud rate
19200BPS, 9600BPS, 4800BPS, 2400BPS, 1200BPS,
600BPS, 300BPS
Parity None, Odd, Even, Ignore
Data length 8 bit, 7 bit
Parallel I/F bidirectional mode OFF, ON
Packet mode Auto, OFF
Character table Software version
Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BARASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15
NLSP version
Italic, PC437, PC850, PC437, Greek, PC853, PC855,
PC852, PC857, PC864, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, Estonia,
ISO 8859-2, PC 866 LAT., PC 866UKR, PC APTEC,
PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863,
BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15, PC771
International character set
for Italic table
Italic U.S.A., Italic France, Italic Germany, Italic, U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
Pitch 10cpi, 12cpi, 15cpi, 17cpi, 20cpi, Proportional
Font
*1
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
Auto CR (IBM 2390 Plus) OFF, ON
A.G.M (IBM 2390P plus) OFF, ON
Manual feed wait time 1 second, 1.5 seconds, 2 seconds, 3 seconds
Buzzer OFF, ON
Roll paper OFF, ON
NOTE: *1: One of the founts selected in the default setting is corresponding to
others (=other font) on the control panel.
Following fonts are not selected in the default setting mode;
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige, and
Script.
NOTE: Settings with Bold are standard factory settings.
Item Setting / Value *2