Service manual

HTTP://BBS.FIXCLUB.COM.CN
EPSON LQ-300+ Revision C
Disassembly and Assembly Disassembly and Assembly 63
4.2.7.2 Platen Removal
1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
2. Remove the platen grounding wire from the platen.
3. Release 1 hook at the rotating hole of the combination gear 17.5, 27 and remove
the gear from the right frame.
Figure 4-10. Hook at the Combination Gear 17.5, 27
4. Rotate right and left bushing, 11 and remove them off from the right / left frame.
5. Remove the platen.
Figure 4-11. Platen Removal
dis20_a
To unhook the combination gear 17.5, 27, hold
it and pull it to the arrow direction.
Combination gear, 17.5, 27
Gear, 34
Bushing, 11
Platen
Gear, 34
Platen grounding wire
Combination gear, 17.5, 27
Right frame
Left frame
Bushing, 11