Service manual

EPSON Stylus C82 Revision A
PRODUCT DESCRIPTION Paper 13
1.3.4 Printer Condition and Panel Status
NOTE: (-) Don’t care.
NOTE: Error messages for the printer driver are classified as "Paper out error"
and "Double feed error."
1.3.5 Errors
No ink cartridge/Ink out
Ink low : Blink
Ink out : On
Paper out
When printer fails to load a sheet, it goes paper out error.
Paper jam
When printer fails to eject a sheet, it goes paper jam error.
Maintenance request
When the total quantity of ink wasted through the cleanings and flushing is
reaches to the limit, printer indicates this error and stops.
Fatal errors
At occurrence of a Carriage Control Error, CG Access Error or Head Hot Error, a
Fatal Error is generated in order to allow recovery of dot-missing the next time
power is turned on.
Double feed error
When printer fails to load a sheet, it goes double feed error.
1.4 Paper
1.4.1 Paper Handling
Reverse feed of more than 9.5mm (0.38") is not allowed.
1.4.2 Paper Specification
Cut sheet
Table 1-6. Printer condition and LED status
Printer status
Indicators
Priority
Power Ink out Paper out
Power on condition On - - 11
Ink sequence Blink - - 7
Ink cartridge change mode Blink - - 6
Data processing Blink - - 9
Paper out - - On 5
Double feed error - - On 5
Paper jam condition - - Blink 4
No ink cartridge/Ink out - On - 8
Ink level low - Blink - 10
Enter EEPROM and Timer
IC reset
- On On -
Maintenance request Fast blink Fast blink Fast blink 3
Fatal error Blink On Blink 2
Power off Blink Blink Blink 1
Table 1-7. Paper specification (Cut sheet)
Paper size Paper width Paper length Thickness Weight (lb) Quality
A4 210mm 297mm
0.08 to
0.11mm
64 to 90g/m
2
(17 to 24)
Exclusive
paper
Bond paper
•PPC
Letter 215.9mm 279.4mm
B5 182mm 257mm
Legal 215.9mm 355.6mm
Executive 184.2mm 266.7mm
Half-letter 139.7mm 215.9mm
A5 148mm 210mm
Photo paper 101.6mm 152.4mm