Service manual

EPSON Stylus C82 Revision A
PRODUCT DESCRIPTION Paper 14

Envelope
NOTE: Envelope printing is only available at normal temperature.
NOTE: Keep the longer side of the envelope horizontally at setting.

Index card

Post cards (Card)
1.4.3 Printing Area
1.4.3.1 Cut Sheet
NOTE: (*) Bottom margin is expanded to 3mm when paper dimension is
defined by using command, otherwise it is not expanded (14mm).
NOTE: From a form lower end 3mm as for 14mm area a printing may scramble.
Table 1-8. Paper specification (Envelope)
Paper size Paper width Paper length Thickness Weight (lb) Quality
No.10 241mm 104.8mm
0.16 to
0.52mm
45 to 75g/m
2
(12 to 20)
• Bond paper
• Plain paper
• Air mail
DL 220mm 110mm
C6 162mm 114mm
Table 1-9. Paper Specification (Index card)
Paper size Paper width Paper length Thickness
A6 Index card 105mm 148mm
Less than 0.23mm
5 x 8" Index card 127mm 203mm
10 x 8" Index card 254mm 203mm
Table 1-10. Paper Specification (Post cards)
Paper size Paper width Paper length
Post card 100mm 148mm
Return post card 200mm 148mm
Table 1-11. Character mode
Paper size
LM
(Left margin)
(min.)
RM
(Right margin)
(min.)
TM
(Top margin)
(min.)
BM
(Bottom margin)
(min.)
A4 3mm (0.12”) 3mm (0.12”) 3mm (0.12”) 14mm (0.54”)
Letter 3mm (0.12”) 9mm (0.35”) 3mm (0.12”) 14mm (0.54”)
B5 3mm (0.12”) 3mm (0.12”) 3mm (0.12”) 14mm (0.54”)
Legal 3mm (0.12”) 9mm (0.35”) 3mm (0.12”) 14mm (0.54”)
Statement 3mm (0.12”) 3mm (0.12”) 3mm (0.12”) 14mm (0.54”)
Exclusive 3mm (0.12”) 3mm (0.12”) 3mm (0.12”) 14mm (0.54”)
Table 1-12. Raster graphics mode
Paper size
LM
(Left margin)
(min.)
RM
(Right margin)
(min.)
TM
(Top margin)
(min.)
BM
(Bottom margin)
(min.)
A4 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)
Letter 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)
B5 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)
Legal 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)
Statement 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)
Executive 3mm (0.12”) 3mm (0.12”) 3mm (0.12”)
14mm (0.54”) /
3mm (0.12”)
(*)