Service manual

EPSON Stylus C82 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 34
5. Follow the order below to remove ASF Trigger Lever from ASF Frame.
Figure 4-23. ASF Unit Disassembly 2
6. Follow the order below using a common screwdriver to release the Hopper (left
side) attachment from the ASF Frame, then remove the Hopper from the ASF
Frame.
Figure 4-24. ASF Unit Disassembly 3
7. Allow the Compression Spring 2.9 to rotate to the left from the ASF Frame, then
remove it.
8. While spreading the left side surface of the ASF Frame toward the outside, follow
the order shown below to remove LD Roller Shaft.
Figure 4-25. ASF Unit Disassembly 4
9. Release Extension Spring 2.25 from hooks on ASF Frame and Retard Roller
Holder, then remove spring.
10. Pull the protrusion of the Retard Roller Holder fastened to the ASF Frame away
from the ASF Frame in the direction of the arrow for one side and then the other.
Then remove Retard Roller along with Retard Roller Holder.
Figure 4-26. ASF Unit Disassembly 5
Hooks
Extension spring 1.67
ASF Trigger Lever
1
1'
2
2'
3
ASF Frame
2
3
Hopper
Hook
4
1
Compression spring 2.9
LD Roller Shaft
1
3
2
ASF Frame
Extension spring 2.25
Retard Roller Holder
Hook
Hook
<ASF Frame Bottom Surface>