Specifications

Setting Up Additional Computers 33
If it fails to print, try the following:
Make sure that the printer and print server are connected and that
both are on.
Check the printer to see if a red light is on or flashing, indicating that
paper or ink is out, or paper is jammed. See Printer Basics for details.
Check WP-Admin to make sure you have a signal (see page 24).
Make sure you entered the correct IP address and server name in step 5.
Now youre ready to print. For instructions, see Printer Basics.
Setting Up Additional Computers
You need to install the EPSON Stylus C84WN printer driver and configure a
network port on every computer using the printer.
1. Make sure your computers wireless mode is set to either
Infrastructure, if
you are connecting to the printer through an access point, or
802.11b Ad
Hoc
, if you are connecting without an access point.
If your wireless adapter doesnt include an
802.11b Ad Hoc option, select Ad
Hoc
, Computer-to-Computer, or whatever mode your card or adapter uses
to communicate without an access point. Do not select a pseudo ad hoc or
proprietary ad hoc mode.
2. If youre using infrastructure mode, make sure there is a link with good signal
strength between the computer and the access point.
3. Insert the printer software CD-ROM.
4. On the Installation Program window, double-click
Install EPSON Stylus
C84WN Printer Driver
and follow the instructions on the screen to install
the driver.
5. If youre using Windows Me or 98, double-click
Install EpsonNet Direct
Print Utility
and follow the instructions to install this utility.
6. Click the button to exit the Installation Program window.