Specifications

56 Configuration Settings
IP Address
Address used to identify a node on a network supporting the TCP/IP protocol.
The format for IP (Internet Protocol) addresses is a set of four bytes or segments,
separated by periods. Each byte can have any value from zero (0) to 254. If you
need to enter an address, make sure it conforms to the addressing scheme for your
network and that it does not conflict with the IP address for any other node on
your network. The print server’s default IP address is 192.0.0.192.
To view your computer’s IP address, subnet mask, and other information, do the
following:
Windows XP/2000/NT:
1. From the Windows Start menu, click
Run.
2. Enter
cmd in the text box and click OK. You see a DOS window.
3. At the prompt, type
ipconfig and press Enter. You see your computer’s IP
configuration file, which includes the IP address.
4. At the prompt, type
exit to exit the DOS window.
Windows Me/98:
1. From the Windows Start menu, click
Run.
2. Enter winipcfg in the text box and click
OK. You see the IP Configuration
window.
3. Select your wireless adapter from the pull-down list. You see IP configuration
information, including the IP address.
4. Click
OK to close the IP Configuration window.
WorkGroup/Domain
Used on networks that support NetBIOS or NetBEUI. WP-Admin detects this
setting automatically, so you should not have to change it. The print server must
be on the same workgroup or domain as all computers using the printer.
Subnet Mask
Make sure this matches the subnet mask for your network. This setting will be
255.255.255.0 for most networks in the home or small office.