System information

_________________________________________________________________
Introduction
Blastware Operator Manual 1–3
2. From the welcome screen, select “Install the Blastware [Version No.] software”. You then
have the option to select and Save manuals from the CD to your hard drive. Additionally, you
can select View for any of these manuals and they will open after being saved. Or, you may
choose to View or Save them independently.
3. Accept the destination directory for the manuals, or choose a new one.
Note: If you have purchased the Advanced Module, do not insert the USB stick until after the
installation.
4. The message below appears. Select the Proceed button to continue with the Blastware
Installation. Exit cancels the installation:
5. An “Installing Dongle” message flashes on the installation window indicating that the
Dongle software is being installed.
6. After the Dongle software is installed, the Blastware installation process begins, indicated by
a flashing “Installing Blastware” message:
7. The InstallShield Wizard appears. Proceed with the installation by selecting the Next button.
You may stop the installation at any time by selecting Cancel.