System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–99
(1) Communications
i Select the Settings option from the Communications menu.
ii Enter the Host Computer IP address running the Blastware program.
iii Enter the Port Number that will be receiving the call from the seismographs.
iv Save these settings by clicking the OK button. Select Exit.
(2) Raven Modem Setup
i The Raven X modem must also be configured for TCP communication. Start the
Acemanager program and connect to the modem using the provided URL.
ii Select the Serial tab.
iii The settings should be as outlined below except where noted: