System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–117
ii IP (Internet Protocol)
IP communications refers to a network and transport protocol used for exchanging packets of
data over the Internet. For a complete description of the Auto Call Home IP
Communications protocol, refer to Subsection C of this Section.
(2) Serial No.
Displays the active unit that is calling the PC.
(3) Port
Indicates the port which the unit is calling in on.
(4) Time
Displays the time which the unit contacted the PC.
(5) Current Status
Indicates whether or not the unit has made a connection or is not connected.
(6) Connects
Displays the number of times the unit has successfully connected.
(7) Events
Displays the number of Events that have been successfully copied to the PC.
(8) Write to File
Use this command to save a text file of the Activity Log.
(9) Activity Log
The Activity Log displays a current log of activity including incoming calls, serial number(s),
and the port(s), that the unit(s) is calling in on. Additionally, it indicates the files that are
being transferred and emailed with their destination directory. The Activity Log returns to
Monitoring for Call Home status once the download from a unit is completed.
(10) Error Log
The Error Log displays units that were not able to successfully call into the PC.
(11) Connect/Disconnect
Click on the Connect/Disconnect to start or stop communicating with the unit(s). When you
select Connect, the units that are setup to call home will automatically be displayed in the Serial
No. column.
(12) Print
After a unit has connected and sent the Events and connection information, you are able to print
out the Activity and Error Log details by clicking on Print.