System information

Blastware Compliance Module
___________________________________________________
4–128 Blastware Operator Manual
4.5.2 Editing Mail Delivery
The Edit Mail Delivery dialog box is used to create Blastware Mail accounts that specify what
information from which monitors will be sent to which e-mail addresses. Click on the Edit button
located in the main Blastware Mail window, and the following dialog will appear:
a. Remote Unit Serial Numbers
Type in the monitor serial number(s), or enter “*” to include all units.
b. Description
Enter a description for the Blastware Mail account. This entry will be displayed in the main
Blastware Mail window.
c. Email Address
Click on the checkbox to activate the e-mail field, and then enter the e-mail address of the
recipient. Enter only one address per field.
d. Peak Filter
Select this option to filter unwanted Events; specified Event information will only be sent if the
Peak Particle Velocity of any of the three Geophone channels exceeds the number in this Peak
Filter field. Example: by entering a value of 2, Blastware Mail will only send Events with a Peak
Particle Velocity that exceeds 2 mm/s or 2 in/s, depending on the units of measure selected on the
monitor.
e. Peak
Select this option to have the Peak Particle Velocity for the Transverse, Vertical and Longitudinal
channels sent to the specified e-mail address.
f. Accel (Acceleration)
Select this field to send the peak acceleration value of each channel.
g. Disp (Displacement)
This sends the Peak Displacement of each channel.
h. Mic (Microphone)
Sends the Microphone channels peak sound pressure. The units of measure displayed will be
those selected on the unit: decibels (dB), Pascal [pa. (L)], or pounds per square inch (psi).
i. Freq (Frequency)
This selection provides the Frequency of each Peak in the waveform.