System information

____________________________________________________
Blastware Advanced Module
Blastware Operator Manual 6–39
6.10.2 Post Event Notes
This tool is only available when the Event Manager is active. The Post Event Notes tool is
available when the Blastware Event Manager and/or a Report window are open. Refer to Section
3.3.3 for more information about Post Event Notes.
6.10.3 ASCII Conversion
This tool is only available when the Event Manager is active. The ASCII Conversion tool is
available when the Blastware Event Manager and/or a Report window are open. Refer to Section
4.3.4 for more information about ASCII Conversion.
6.10.4 Human Exposure Report
The Human Exposure Report option enables you to calculate frequency-weighted Vibration
Dosage Value (VDV) and Root Mean Square (RMS) on a series of Events selected in the Event
Manager. Once you have selected or created a frequency weighting, click on the Calculate button.
Results are shown in the Calculations area.
If the channel data is in Velocity, the data is differentiated to acceleration prior to the calculation.
The acceleration data is then weighted as specified in the selected Frequency Weighting file. The
available list of weightings includes the ISO 2631-2:2003 Wm weighting. The microphone
channels (4 and 8) are not available if a compliance event has been loaded.
To display the Human Exposure Report dialog, click on the Tools menu and select Human
Exposure Report. The following dialog appears:
(1) Frequency Weighting File
Press the Browse button to navigate through your directories and load an existing frequency
weight table (.fwt) file.
(2) New
Select New to create a frequency weight file. The following dialog appears: