System information

____________________________________________________
Blastware Advanced Module
Blastware Operator Manual 6–65
(2) Number of Decks per Hole
Enter the proposed number of Decks per Hole in your production blast. This assumes your
signature hole waveform was a single hole without any inter-deck delays. If your signature hole
waveform had inter-decks delays then enter 1 for the number of decks and skip step #3.
(3) Inter-Deck Delay
Enter the Start, End, and Increment values in msec for the number of Decks per Hole. ie 2
decks and a range from 10 to 20 msec. The increment number allows you to reduce the number of
simulations and quickly narrow in on the desired delays.
(4) Number of Holes per Row
Enter the proposed number of Holes per Row for you production blast. This assumes your
signature hole waveform was a single hole. If your signature hole waveform was an entire row of
holes then enter 1 for the number of holes per row and skip step #5.
(5) Inter-Hole Delay
Enter the Start, End, and Increment values in msec for the number of Holes per Hole. ie 10
holes per row and a range from 10 to 30 msec. Again, the increment number allows you to reduce
the number of simulations and quickly narrow in on the desired delays.
(6) Number of Rows
Enter the proposed number of Number of Rows in your production blast.
(7) Inter-Row Delay
Enter the Start, End, and Increment values in msec for the Number of Rows. ie 5 row of holes
and a range from 120 to 150 msec. Again, the increment number allows you to reduce the number
of simulations and quickly narrow in on the desired delays.
(8) Sorting Options
The sorting options act like a filter and allow you to quickly sort the simulated waveform and only
view the results you want. The results that do not meet your criteria are not deleted they are just
not displayed. To view the entire list of results simple remove the check mark in the Apply Sort
Options box. The sort options allow you to customize your sort and redisplay your results
narrowing your search until you find the results that best meet your requirements. For each of the
sort criteria, PPV, PVS, FFT Frequency, or Frequency Ratio, you can choose to view the
results that are Greater Than, Less than or Equal to, the value you enter. The Priority box then
allows you to sort the results based on your own order of priority.