System information

Blastware Advanced Module
____________________________________________________
6–66 Blastware Operator Manual
(9) Frequency Ratio
The Frequency Ratio indicates the concentration of Upper to Lower ranges in Hz. The upper
and lower ranges can be adjusted to suite your requirements.
(10) Apply Sort Options
Indicate whether to apply or ignore the Sort Options that you have selected. If you choose not to
use this option, than all the results will be listed in the table based on the blast timing simulation.
This starts with the Deck delay followed by the Hole delay and finally by the row delay.
(11) Clear All
Click on the Clear All button to reset all Sort Options to a null or zero-value state.
(12) Apply Band Pass Filter
Input a frequency range in the From and To fields. Any signals that fall outside the specific range
will be filtered out of the signature hole waveform and not used in the simulation waveforms.
(13) Project Directory
Create or use and existing Project Directory by selecting the ‘…’ command.