System information

____________________________________________________
Blastware Advanced Module
Blastware Operator Manual 6–69
Based on the Signature Hole Waveform previously shown, and the values input into the
Signature Hole Analysis Simulation dialog a Signature Hole Analysis Table is displayed.
(3) Review the Signature Hole Analysis Table
The table will be displayed using the sort parameters selected in the Signature Hole Analysis
Simulation dialog. Additional sorts may be selected by clicking on any column header. A sort
arrow will appear – click on the arrow to sort from ascending to descending.
Under Filename, you can double-click to view the associated Event Report that the Signature Hole Analysis Simulation
tool has generated based on your input values. The file name corresponds with the values input into the Timeline
Generation section of the Signature Hole Analysis Simulation tool.
Refer to the first file named 1H12R7D0H15R100.BWP, which translates to 1 Deck per Hole, 12 Number of Holes per Row,
7 Number of Rows, 0 Start for Inter-Deck, 15 Start for Inter-Hole Delay, and 100 Start for Inter-Row Delay. File
names will change based on the increment value for each delay. Refer to the image below for more information on the file
naming convention:
Sort Option Arrow – Ascending or Descending
Double click on an
y
file to o
p
en the associated Event Re
p
ort