System information

Blastware Compliance Module
___________________________________________________
4–2 Blastware Operator Manual
4.1.2 Report Options
The Report Options command defines the contents of the Event Report created by Blastware
which can then be printed using your computers printer. This report is not the same report as the
one printed by the Blastmate III printer or the Minimate Plus using a printer. The setups of this
report can be different from the monitor report. You can define which Event information to
include or exclude in the report.
To change these settings, select the File Menu and choose Report Options. The Report Options
dialog box appears. This dialog has several tabs, with each tab containing options that control the
printed results of the Event Report – these tabs are Data Display, Units and Channel, Compliance
Scaling, and FFT Report Options.
To accept any changes that you make within Report Options, click on Apply. Any changes that
you have made will be automatically updated and the Report Options dialog will remain open. If
you make changes, but decide not to accept them, click on Cancel. Clicking on OK will apply the
changes and exit from the Report Options dialog.
a. Data Display
(1) Report Title
The Report Title may be changed to a title of your choice. To change the title, click on the Report
Title text box. Press the Backspace key to delete the existing title and then enter your new title.
(2) Compliance Graph for Geophone 1
Blastware supports numerous Compliance Reports for each attached Geophone.
To choose a report, click on the Compliance Report drop–down menu and scroll through the
standards. Click on the required standard.
(3) Compliance Graph for Geophone 2
Blastware supports numerous Compliance Reports for each attached Geophone.
To choose a report, click on the Compliance Report drop–down menu and scroll through the
standards. Click on the required standard.