System information

Modem Operation
_____________________________________________________________
7–4 Blastware Operator Manual
7.1.6 How to Connect to a Remote Monitor Using Modems
To connect to a remote monitor using modems, first configure your modems to operate on your
computer. See the instructions that came with the modems. Before you connect the remote modem
to a remote monitor, initialize the modem by connecting it to the computer running the Blastware
program. Press the Initialize Remote Modem button in the Communications Setup dialog box.
Remove the remote modem. Connect the PC Modem and initialize it. Press the Initialize PC
Modem button. Connect the modems to a telephone line. From the Communications Setup dialog
box, choose Dial. Select the telephone number of the remote modem from the dialing list. Connect
to the remote modem. Change the settings on the remote monitor. Re-enter the monitor mode, if
required. Choose Hangup. Your modem session is complete.
7.1.7 Communications Setup
Open the Communications Setup dialog box. From the Blastware Main Menu, click on the
Unit Menu and select Communications.