System information

Modem Operation
_____________________________________________________________
7–10 Blastware Operator Manual
i All, Current to End, Current Only
These commands determine which part of the script file to execute. All executes all the
commands within the displayed section of the script file. Current to End executes the
commands from the line displaying the cursor to the end of the displayed section of the script
file. Current Only executes the line with the cursor displayed.
If the command is followed by the CHECKRESPONSE, SHOWRESPONSE or PAUSE
command, then that command will also be executed. The cursor advances automatically to the
next line after the execution. The execution ends by clicking the Cancel button. The
execution also ends if it encounters an error or when it reaches the end of the displayed
section of the script file.
ii Commands
This window displays the commands within the specified section. Lines beginning with a "*"
will be ignored during execution. Commands can be added, modified, or deleted. For a
complete command set and a detailed description of each command, please refer to the
Modem Script File section appearing at the end of this chapter.
iii Execution Output
The Execution Output window displays the results for each executed command including the
command line number, the command itself, time spent executing the command, and the
response string received from the modem. To save the output, click the Save Output button.
To print the output, click the Print Output button. To clear the window, click the Clear
Output button.
iv Close
This command closes the dialog box.
7.2 Setting Up a Cellular Telephone and Modem
Cellular modem phone support connects a computer to a remote monitor without the requirement
of a telephone land line. Consult your local cellular telephone service provider for information on
compatible equipment and services in your area.
7.2.1 Modem Script File
A script file contains commands to control and identify a programmable modem. The commands
are grouped into 5 procedure blocks and one file terminator. Each procedure block name is