System information

Modem Operation
_____________________________________________________________
7–14 Blastware Operator Manual
******************* Initialize to Factory Defaults ************
* This should disable flow control, compression and error control.
* Enable the default result codes so that 'OK' is returned.
String_CR= AT&F
Pause= 2
****************** Display Result Codes ***********************+
String_CR= ATQ0
CheckResponse= 3 OK
****************** Auto answer after 1 ring *********************
String_CR= ATS0=1
CheckResponse= 3 OK
****************** Disable Display of Result Codes **************
String_CR= ATQ1
Pause= 3
***************** Turn local echo off ****************************
String_CR= ATE0
Pause= 2
** Write these settings to memory. These settings will be recalled when the
** Modem is powered up in the future.
String_CR= AT&W
[End]