System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–19
18. Make the necessary changes and retry establishing communications, starting at Step 5. If
no changes are required in the Internet Protocol (TCP/IP) Properties dialog, contact
your Network Administrator for help to troubleshoot the Ethernet connection.
19. Within the Blastware Event Manager, select the Series IV Unit icon to display the unit
(or units, if using a router) that is available for communication:
20. Select the specific unit that you want to view data.
For the setup of communications using Static IP Address, please follow these directions:
ii Ethernet - Static IP Address Setup
21. If required, obtain a Static IP and Static IP Mask (if using a WAN) from your Internet
Service Provider.
22. Start the unit. Press the Setup key.
23. Press the Down Arrow key until View/Edit Preferences is highlighted. Press Enter to
open the menu.
24. Press the Down Arrow key until the Ethernet option is highlighted. Press the Right
Arrow key to enter the menu.