System information

Blastware Compliance Module
___________________________________________________
4–20 Blastware Operator Manual
25. Press the Right Arrow key on the first entry of the menu, Ethernet, to toggle the feature
On.
26. Press the Down Arrow key to highlight Mode. Press the Right Arrow key until the
selection is changed to Static IP.
27. Press the Down Arrow key until Static IP Address is highlighted. Press the Right
Arrow key to enter the edit value fields. Press the Right and Left Arrow keys to
navigate the value fields, and the Up and Down Arrow keys to change the values to
match the supplied Static IP address.
28. Press the Down Arrow key until Static IP Mask is highlighted. Press the Right Arrow
key to enter the edit value fields. Press the Right and Left Arrow keys to navigate the
value fields, and the Up and Down Arrow keys to change the values to match the
supplied Static IP Mask address. LANs use the Static IP Mask number
255.255.255.000. WANs use variable numbers, assigned by your Internet Service
Provider.
29. Press the Enter key to Save the new settings.
30. Press the Cancel key to return to the Preferences menu.
31. Press the Cancel key to return to the Main Display.
32. Within Windows, select the Network Connections icon from within the Control Panel.
Select the Network Connection name that represents your Series IV unit (shown below,
this was named “Series IV” during the setup of the Ethernet card):
33
. The Properties dialog appears. Select the Properties button under the General tab, as
shown below:
34. Under the “This connection uses the following items:” box, scroll down and highlight
Internet Protocol (TCP/IP) and then select the Properties button within the General
tab: