System information

Blastware Compliance Module
___________________________________________________
4–26 Blastware Operator Manual
b. Series II and III Recording Setup
Note: The Recording Setup for Micromate is covered in the previous step.
The record mode sets how the monitor records Events. To choose a recording mode, click on the
Recording Mode drop-down menu and select a record mode. Choose one of the following
recording modes.
i Single Shot Record Mode
Use single shot record mode to record one Event automatically. The monitor records the Event,
displays the results, and stops. No further recording occurs. Recording begins automatically when
an Events vibration or overpressure channel exceeds the preset trigger level.
ii Continuous Record Mode
Use continuous record mode to record multiple Events automatically with no dead time between
Events. The monitor records an Event, displays the results, and continues to monitor, ready to
record following Events. The monitor records all Events whose activity exceeds the preset trigger
level.
iii Manual Record Mode
Use manual record mode if automatic triggering is unreliable, due to excessive wind or nearby
vehicle activity, or to record the background noise level in the vicinity of a site. Recording can be
initiated from the Unit Monitor Status dialog.