System information

Blastware Compliance Module
___________________________________________________
4–32 Blastware Operator Manual
When the Remote Alarm option is selected, the Warning Hold Time, Alarm Hold Time, and
Alarm On drop down boxes become available. The Alarm On option allows you to select which
sensor setup and activity that you would like to initiate a Remote Alarm.
iv Warning Hold Time
Set the duration of time for the warning. The default setting is Manual Clear, which requires
pressing the Enter (Checkmark) key at the unit. Additional settings include 2, 5, 15, 30, 60, 180
and 300 seconds.
v Alarm Hold Time
Set the duration of the alarm. The default setting is Manual Clear, which requires pressing the
Enter (Checkmark) key at the unit. Additional settings include 2, 5, 15, 30, 60, 180 and 300
seconds.
i Pre Trigger
The Pre Trigger feature captures up to one second of buffered event data that was recorded prior
to the set Trigger Level, and includes it in the final recorded Event Data. Set a Pre Trigger
range from 0.25 Sec to 1.00 Sec.
(2) Command Buttons
To choose one of the following command buttons, click the mouse pointer on the button.
i Cancel
Exit the dialog box and return to the previous Recording Setup dialog without accepting the
changes.
ii OK
Approve the changes in this dialog box.
e. Notes
To display the Notes dialog box, open the Unit, Setup, Compliance Setup menu and select the
Notes tab. The Edit Notes dialog box appears.
The Notes dialog box lets you enter notes about an Event. These notes are then saved with the
Event when it is recorded. The notes become part of the permanent record and cannot be changed
after an Event has been recorded. The notes are very flexible, offering you the ability to change
their titles and content.