System information

Blastware Compliance Module
___________________________________________________
4–48 Blastware Operator Manual
(2) User Notes
Enter the notes you wish to include with the recorded Events. You can include user note headings
like the ones in the figure above. You can use these headings or delete them and enter your own.
You can also delete them entirely and use no headings. Headings can range up to 20 characters in
length. In the right hand column, enter your user notes. User notes can range up to a maximum of
40 characters in length.
(3) Extended Notes
Use this area to enter additional notes as required up to a maximum of 640 characters.
(4) Enable Extended Notes
When you enable extended notes, the information contained in the Extended Notes dialog box is
recorded with every Event. If you do not require this information, disable extended notes by
clicking on the Enable Extended Notes checkbox to clear the checkmark.
(5) Extended Notes Title
Enter a name for the extended notes section up to 20 characters in length.
(6) Enable Job Number
You may include a job number to identify a series of recorded Events. This helps you keep track
of Events in the monitor and on your computer. To enable the Job Number, click the mouse
pointer on the Enable Job Number checkbox to enter a checkmark.
(7) Job Number
Enter a job number. Job numbers range from 1 to 9999. Double click on the Job Number box and
enter a new job number.
(8) Enable GPS Notes
Check this box to enable GPS Notes to be included on the Event Report. The GPS information
is captured form the waypoints that are entered on the unit within the View/Edit Setup > GPS
Location feature. Refer to the Minimate Pro Operator Manual for information on how to enter
GPS Locations.
(9) Enable Scaled Distance
Check this box to enable the recording of scaled distance information with each Event. Enter the
Distance from blast and the Charge Weight. Blastware automatically calculates and displays the
Scaled Distance value. The value appears both within this dialog box and on Event Summary
Reports.
(10) Distance from blast
Enter the distance from the monitor to the blast in feet or meters.
(11) Charge Weight
Enter the charge weight of the blast in pounds or kilograms.
(12) Scaled Distance
The Scaled Distance result appears within this dialog box and on Event Summary Reports.
(13) Command Buttons
To choose one of the following command buttons, click the mouse pointer on the button.
i Cancel
Exit the dialog box and return to the Blastware Main Menu.
ii Send To Unit
Transfer your settings to the monitor.