System information

__________________________________________________
Blastware Compliance Module
Blastware Operator Manual 4–51
i Repeat
Select Repeat to have the recording sessions input to be repeated, every Day or Week,
until a Stop Monitor command is sent to the unit from the Unit > Monitor menu, or a
Cancel key press on the unit. Note that when you select Repeat, the column above the
Day calendar will be renamed to Repeat, as shown below:
ii Day
Refer to the figure below. Select the Day setting to view and input recording sessions
into the calendar that will be completed over the duration of the current day.
iii Week
Refer to the figure below. Select the Week setting to view and input recording sessions
into the calendar that will be completed over the duration of a week. Select Repeat to
have the recording sessions input to repeated, indefinitely, until a Stop Monitor
command is sent to the unit from the Unit > Monitor menu, or a Cancel key press on the
unit. Select Repeat to view the actual date as opposed to the day of the week.
TIME CELLS