System information

Blastware Compliance Module
___________________________________________________
4–52 Blastware Operator Manual
iv Clear All
If you want to remove all entries from a Monitor Scheduler Calendar to start the
population process over, select the Clear All button.
v OK
To save and exit the Monitor Scheduler, select the OK button. If you want to exit
without saving, select the OK button, but than select Cancel in the Save dialog. Either
selection will return you to the Compliance Setup > Special Setups tab.
vi Cancel
Press the Cancel button if you don’t want to proceed and exit without saving the
Monitor Scheduler calendar.
vii Send to Unit
1. Press Send to Unit to download the Monitor Scheduler settings to the Series IV
unit. If existing, duplicate named Setup Files exist on the unit, than the
following dialog will appear:
a. Decide if you want to update the Setup File from the file saved on the
PC by selecting User Setup from PC, or from the unit, select User
Setup from Unit. This window will appear for each, first instance
filename that is a Duplicate.
TIME CELLS