System information

Blastware Compliance Module
___________________________________________________
4–58 Blastware Operator Manual
d. Setup Files
To display the Setup Files dialog box, open the Unit, Setup, Compliance Setup menu and select
the Setup Files tab. The Setup Files dialog box allows you to load and save settings from your
PC or the unit, and to specify any changes you have made to be the default settings. These files
have a .set file extension.
(1) Read Setup
i From Disk
Load a saved setup file from your PC. Locate previously saved setup files and load them to
affect the unit currently connected to your PC by clicking on Send to Unit.
ii From Unit
Load the setup library files that are currently being used on the unit connected to your PC.
iii Default
Select Default to load the previously saved file.
(2) Save Setup
i To Disk
Save your current setup settings to a file. Click on To Disk, and save the file into the default
“Dbase” directory.
ii As Default
Use your current settings as the default every time you connect a unit and click on Default.