System information

Blastware Compliance Module
___________________________________________________
4–60 Blastware Operator Manual
NOTE: The Active Setup file is shown at the top of the dialog.
1. Highlight the Setup File that you would like to use.
2. Click on the Select button to change the Setup File.
3. Click on OK to confirm the change, or Cancel to exit the menu without changing the
Operator.
4. Repeat the Steps 1 and 3 above to Rename, or Delete a Setup File.
NOTE: Renaming a setup file which is part of a saved Monitor Scheduler session, will
cancel that part of the scheduled recording session.
5. Click on OK to confirm the change, or Cancel to exit the menu without changing the
Setup File.
NOTE: In conjunction with the Start/Sop Monitor command under the Unit, Monitor
dialog, this is a convenient tool to quickly change setup files as opposed to communicating
through the Unit, Setup dialog. If you don’t have any changes that need to be made to an
existing setup file, or you don’t need to send a new setup file to the unit, use the Setup Files
dialog to interact with the unit.
g. Edit Owner Text (Micromate Only)
With communications successfully setup between the PC and unit, you can edit the Owner
Information displayed on the unit.
To display the Edit Owner dialog box, open the Unit, Setup, and select Edit Owner Text: