System information

Blastware Compliance Module
___________________________________________________
4–66 Blastware Operator Manual
scheduled record mode (i.e. Waveform, Histogram, Histogram Combo, or the optional
VDV Record Mode):
4. The example below demonstrates how you can access the View Real Time Histogram
Data feature, which requires a Series IV monitor, Minimate Pro4 or Minimate Pro6,
and the Ethernet® Communication Cable option. Refer to the section in this manual,
and your Minimate Pro Operator Manual, for more information about what is required
for the Ethernet® communications setup and recording in Histogram Record Mode.
a. The instruction below assumes that Ethernet communications has been
established between the unit and the PC, and that you are already actively
recording with Histogram Record Mode to successfully use this feature.
b. Within Blastware, select the Unit menu.
c. Select the Monitoring menu option.
d. Select Start Monitoring.
e. Select the View Real Time Histogram Data button.
f. The number of channels that you are monitoring will determine how the display
is represented. For instance, monitoring with a Minimate Pro6 with two
geophones will display all six channels (Tran/Vert/Long for each geophone).
Below is an example of one geophone being used during a Histogram Record
Mode monitoring session:
SCALE ICONS