System information

Blastware Compliance Module
___________________________________________________
4–70 Blastware Operator Manual
h. Reload OS and Library Components
This command loads all the software required to operate the monitor including the disk operating
system, the library components, and the compliance report into the monitor. This operation
replaces all the software currently loaded into the unit. The disk operating system becomes the unit
operating system. This feature is most commonly used to upgrade the monitor to the latest
software.
WARNING: Make sure that you are replacing the unit operating system with the required
disk operating system. This procedure cannot be reversed.
Select the required Compliance Report in the Compliance Report Type drop-down menu and
press the Reload OS and Library Components button.
i. Reload Library Components Only
Select this command to send a new version of the Blastware library file to the monitor. The library
file contains the complete Language Library for the entire monitor program. You can use this
command to load a new language into the monitor.
You can also use this feature to load a new Compliance Report into the monitor. To do this,
make sure the unit operating system release and version number match exactly the disk operating
system release and version. If they do not match, the Reload Library Components Only button
will be dimmed requiring you to use the Reload OS and Library Components button only.
Select the required Compliance Report in the Compliance Report Type drop−down menu and
press the Reload Library Components Only button.
j. Reset Unit
This command resets the unit.
k. Cancel
Leave the Reload Operating System dialog box without changing the monitors current software.
4.2.10 Select Unit Type
The Event Manager helps to organize your Event files. From this window you list, copy, delete,
print, and view Events. The Event Manager can be accessed in two ways, 1) from the Main
Menu bar, select Unit, Select Unit Type, or from the Event Manager window in the lower-left
hand corner, select Micromate, Series IV, Series III, Minimate Blaster, or Series II in the lower
left-hand corner of the Main Blastware window.