Service manual

EPSON Color Copy Station 8200 Revision A
Operating Principles Operating Principles 33
2.1 Operating Principles
This section explains the operating principles of CCS 8200. Refer to
each Service Manual for the operating principles of printer and scanner.
2.1.1 Copy System
Copy system of CCS 8200 is as follows.
Figure 2-1. System Connection
CCS-8200 connects the network by 10/100 Base Network Interface
Board (DE-500B) through the switching pab and operate copy server
function. Due to this, each PC on the network can use the common
scanner and printer.
2.1.2 Control Circuit
Hardware architecture of this product is PC/AT personal computer, and
interfaces of ISA and PCI for extension exist respectively.
CPU adopts AMD K6-2 processor, which is driven by 300 MHz Clock,
and has one 32MB RAM-DIMM on the mother board. On the mother
board, CMOS, which records the setting values of BIOS, and a lithium
battery for backing-up are mounted.
2.1.3 ISA Board
On the ISA Board (C85010 I/F), ASIC E02A27, Flash ROM (8Mbit x 12),
EEPROM (AT93C66) and SRAM (256 KB x 1) are mounted. ISA board
is connected to the mother board through ISA bus slot. The figure below
is ISA board block diagram.
Figure 2-2. ISA Board Block Diagram
CPU
Main
Memory
32MB
PCI
Bridge
L2
ISA
Board
ISA
Bridge
NIC
DE-500B
PCI Bus
ISA Board
Control Panel
SCSI Board
AVA-290E
ECP Board
Scanner
Printer
Ethernet
10/100BaseT
ISA BUS
Control Panel
ISA Board
E02A27
ROM
Control
LCD
Control
Touch Panel
Button Control
Flash ROM
8Mbitx12
SRAM
256kx1