Specifications

Partitioning Your Hard Disk

After the DOS Shell screen appears, select the Command

Prompt option. At this point your are ready to initialize your

hard disk drive. To do this, enter the command:

After loading the FDISK program, the computer will display

information on the hard disk drive installed in the system, as

follows:

MS-DOS Version x.xx

Fixed Disk Setup Program

FDISK Options

Current fixed disk drive: 1

Choose one of the following:

19xx, 19xx

1. Create DOS Partition or Logical DOS Drive

2. Set active partition

3. Delete DOS Partition or Logical DOS Drive

4. Display Partition information

5. Select Next fixed disk drive

Enter choice: [I]

Press ESC to exit FDISK

Using Your Hard Disk

6-7