Specifications

4. Press any key. The DISKCOPY program copies the

contents of the MS-DOS diskette to the computer’s

memory, and then you see the following:

If the diskette is not formatted, the DISKCOPY program

formats it. Then the program begins copying the data from

the computer’s memory to the formatted diskette. When

the copy is complete, you see this prompt:

Remove the MS-DOS diskette and insert a blank diskette

(which is to be the target diskette) in drive A. Then press

any key.

6. Press Y so you can make a copy of another MS-DOS diskette.

Again, you see the prompt to insert the source diskette.

Remove the copy of the MS-DOS diskette which you just

made

and insert the another MS-DOS diskette into drive A.

Then press any key. Follow the prompts on the screen to

make a copy of this diskette as you did for the first MS-DOS

diskette.

8. When you finish copying the last diskette and the

prompt appears, press N to return to the MS-DOS

command prompt C > .

After you have copied the MS-DOS diskettes, be sure to label

them carefully so you know which one is which. Write on the

Setting Up Your System

1-17