Specifications

Note
Note that you can bypass the memory test by pressing the
< ESC > key. This option would be useful when the
memory on the system is quite large. You should hit the
<ESC> key when the following message appears on the
screen.
Press <ESC> to bypass MEMORY test
Using Setup
Immediately after the memory test, you will get the following
prompt on the screen depending upon the type of BIOS you
have:
Press <DEL> if you want to run SETUP or DIAGS
Hit <DEL > key to get into the Setup Mode
Note
<DEL > key will get you into the setup mode, only when the
above message is displayed on the screen.
If you hit < DEL > key, a menu appears on the screen giving
you the option of
2-2
The CMOS Setup Program