Specifications

If Shadow RAM is not enabled, the parameters of the drive
must be stored in normal RAM, but the integrity of the
data must be maintained. The options you have are the
following:
1. The BIOS to use 100 bytes at 30h:0
2. The BIOS to reduce the size of the base memory by 1KB.
The default is 1. If you are not using Drive type 47 or not
running programs like OS/2, RAMDRIVE this RAM will
never be used by so you may leave the value as 1.
P start-up speed
This parameter is used to select the system’s default speed.
The options are:
l High speed
Under this option, your system is initially booting with
20MHz CPU speed when you turn the power on.
l Low speed
Select this option is to boot your system with 6MHz
CPU speed as turning the power on.
00 Special Memory
This parameter is used to boost your system’s performance
by loading the BIOS and/or VIDEO controller code into
the RAM space between 640K and lM-byte. The options
are:
l None
Select this option is you are not going to use shadow
RAM.
l BIOS
Use this parameter to copy the system BIOS into shadow
RAM during the start-up routine.
The CMOS Setup Program
2-7