Specifications

The “SOURCE” diskette is the disk that you will be copying
from. Insert the MS-DOS master diskette into the A drive.
Press any key, such as the % SPACEBAR. The floppy disk drive
will be activated, and your computer will display:
The contents of the disk are being read into your computer’s
memory. After a few moments, the following message will
appear:
When the drive indicator light goes out, remove the MS-DOS
master diskette from the floppy disk drive. Insert a new, blank
diskette into the drive. This is the “TARGET” diskette.
Press the SPACEBAR key. The drive will turn on, indicating
that the computer formatting the new diskette, then writing
the copied information onto it. After a few moments, the drive
will turn off, and the system will display:
Using MS-DOS With Your Computer 4-13