Specifications

Never attempt to open the hard disk drive. The disk itself
is enclosed in a sealed container to protect it from dust.
Inserting and Removing Diskettes
To insert a diskette into the drive, hold it with the label facing
up and the read/write slot leading into the drive, as shown
below.
Figure 3-4. Inserting a diskette (5’/4”)
Slide the diskette into the slot until it is all the way in. Then
turn the drive latch down to lock it in a vertical position. This
keeps the diskette in place and enables the read/write heads in
the diskette drive to access the diskette.
If a diskette is in the drive but the latch is up (horizontal) and
you enter a command for that drive, the computer cannot tell
there is a diskette in the drive and displays an error message
such as:
Using Your Computer
3-11