User`s guide

37
Scanning
■ Placing Your Original Document
■ Using EPSON Smart Panel
■ Scanning to a File
■ One-Touch Scanning
■ Advanced Scanning With EPSON Scan
Placing Your Original Document
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper left corner. Move your
document about 0.1 inch from the top and side edge so your entire document is
scanned.
3. Close the scanner lid.
Note: If you place your document against the guides, the edges next to the
guides won’t be scanned.
If you need to scan a thick document, such as a book, you can remove the
scanner lid to scan. Gently press down the original to keep it flat on the document
table. Be sure to replace the scanner lid when you’re finished.
Move the document
in about 0.1 inch
from the edges